Lifting Capacity : 80t
Boom height : 42 + 16m
Engine capacity : 186 kW
Weight : 82t
Download Adobe Acrobat Specification Sheets
| Engine |
- Deutz Diesel engine TDC2013L062V, with direct injection, water-cooled.
- Output as per DIN/ISO: 186 kW (253 HP) at 2000 rpm.
- Dry air filter with cyclone preliminary filter, safety element and pollution indicator.
- Fuel tank capacity: 550 l.
- Electric system 24 Volt 2 highly efficient cold starting batteries
|
| Hydraulic system |
- Load-sensing hydraulic-system.
- The variable displacement piston pump is equipped with pressure cut-off function and with a energy-saving flow-ondemand control.
- Through the independent and proportional feed of the oil flow all working functions can be operated parallelly, independently and very precisly.
- High efficiency through well designed hydraulic valves and lines.
- Seperate hydraulic circuit for the swing drive.
- Individually and precisely swing operation.
- Axial piston pumps Flow rates 1 x 520 l/min, 1 x 80 l/min working pressure 330 bar
- Hydraulic tank capacity 1350/1150 l
- Hydraulic oil filter with long time change interval.
- Healthy oil temperature through high dimensioned hydraulic oil cooler.
- Central service board for easy and rapid check of complete hydraulicsystem.
- Servo joy sticks for operating movements and additional functions as per ISO-System.
|
| Swing system |
- The swing operation is driven independently through an axial piston motor, spring-loaded hydraulically releasable multiple-disk brake, planetary gear and pinion shaft.
- Large dimensioned swing bearing.
- Swing speed 0 – 2.0 rpm, infinitely controllable.
- Hydraulic motor with integrated brake valves for reduction of wear in braking system to a minimum.
|
| Undercarriage |
- Each track is independently driven by an axial piston motor through planetary final drive.
- The drives are integrated into the track frames and protected by covers.
- Spring loaded hydraulically releasable multiple-disk brakes as safety parking brakes for reliable stopping.
- Version I: Undercarriage hydraulically extendable Tele 83/390.
- Version II: Starlifter undercarriage R87/440 in wide gauge version, gauge width 4.4 m, 4 hydr. cylinders, removable side frames for transport.
- Maintenance-free track-type B7 with triple-bar-grouser track pads and hydraulic track-tensioning device.
- Travel speed 0-2.5 km/h, 2-speed travel motors.
- High traction force and good ground clearance to ensure excellent rough terrain travel.
- Option: 900 mm flat track shoes
|
| Upper Structure |
- Torsion-free upper frame with continous bearing-plates for optimal power introduction, precision machined.
- Steel-bushes for the boom-pivot. Special sound insulation for the engine.
|
| Working equipment |
- Telescopic five-section boom, hydr. extend- and retractable.
- Boom hoist cylinder and telescopic cylinder with safety check valves.
- Hoist winch via hydraulic motor with safety valve and planetary gear with safety multi-disk-brake in the oil bath.
- Line pull max. 72 kN, hoist speed max. 0 – 95 m/min, rope dia. 20 mm.
- Jib, adjustable (0º/20°/40º), it can be mounted very fast and very easily without any helping devices.
- If fly jib is not used, it can be locked on the side of the main boom.
- Safety equipment according to Australian regulations.
- Safe load indicator (SLI) with clear text indication of boom angle, boom length and radius, hoist end switch.
|
| Operators cab |
- SENNEBOGEN maXcab with sliding door, excellent ergonomics, automatic heating/air conditioning with temperature pre-select and fresh air/recirculation filter, air suspended comfort seat optionally adjustable, excellent 360° visibility, SENNEBOGEN Diagnostics System
|
| Service weight |
- Service weight with 42 m telescopic boom, jib, 20 t hook and track-type B7 with 700 mm triple-bar track shoes, 1 hoist winch
- 683 HD with hydraulically extendable undercarriage, counterweight 20,5 t, carbody counterweight 13 t
approx.: 83.5 t
- 683 HD Star-Lifter with wide gauge undercarriage, counterweight 25.9 t, carbody counterweight 8 t, 1 hoist winch
approx.: 86.3 t
|
* Further details see adobe specifications download or please contact PACECRANES.
† Due to improvements, the specifications are subject to
change without notice.
|
