| Engine |
- Deutz Diesel engine TCD2013L06 2V, with direct injection, water-cooled.
- Output as per DIN/ISO: 186 kW (253 HP) at 2000 rpm.
- Dry air filter with cyclone preliminary filter, safety element and pollution indicator.
- Fuel tank capacity: 550 l
- Electric system 24 Volt 2 highly efficient cold starting batteries
|
| Hydraulic system |
- Load-sensing hydraulic-system. The variable displacement piston pump is equipped with pressure cut-off function and with a energy-saving flow-ondemand control.
- Through the independent and proportional feed of the oil flow all working functions can be operated parallelly, independently and very precisly.
- High efficiency through well designed hydraulic valves and lines.
- Seperate hydraulic circuit for the swing drive. Individually and precisely swing operation.
- Axial piston pumps
- Flow rates 1 x 520 l/min, 1 x 80 l/min working pressure 330 bar
- Hydraulic tank capacity 1350/1150 l
- Hydraulic oil filter with long time change interval.
- Healthy oil temperature through high dimensioned hydraulic oil cooler.
- Central service board for easy and rapid check of complete hydraulicsystem.
- Servo joy sticks for operating movements and additional functions as per ISO-System.
|
| Swing system |
- The swing operation is driven independently through an axial piston motor, spring-loaded hydraulically releasable multiple-disk brake, planetary gear and pinion shaft.
- Large dimensioned swing bearing.
- Swing speed 0 – 2.0 rpm, infinitely controllable.
- Hydraulic motor with integrated brake valves for reduction of wear in braking system to a minimum.
|
| Undercarriage |
- Undercarriage welded as rigid, torsion-free box-type design with integrated 4-point outriggers.
- The drive function is powered by 2 variable displacement piston motors with directly flanged brake valves.
- 2-circuit servo brake system with additional safety brake as parking brake.
- Steering axle as hydraulically controllable oscillating axle.
- Oscillating axle cylinders with safety check valves.
- All wheel drive
- Drive speed 0 - 10 km/h 70 t special wide gauge axles 8 tires, 14.00-24
- Optional: 8 tires, 16.00-25
|
| Upper Structure |
- Torsion-free upper frame with continous bearing-plates for optimal power introduction, precision machined.
- Steel-bushes for the boom-pivot.
- Special sound insulation for the engine.
|
| Working equipment |
- Telescopic five-section boom, hydr. extend- and retractable.
- Boom hoist cylinder and telescopic cylinder with safety check valves.
- Hoist winch via hydraulic motor with safety valve and planetary gear with safety multi-disk-brake in oil bath.
- Line pull max. 72 kN, hoist speed max. 0 – 120 m/min, rope dia. 20 mm.
- Safety equipment according to Australian regulations.
- Safe load indicator (SLI) with clear text indication of boom angle, boom length and radius, hoist end switch.
|
| Operators cab |
- SENNEBOGEN maXcab with sliding door, excellent ergonomics, automatic heating/air conditioning with temperature pre-select and fresh air/recirculation filter, air suspended comfort seat optionally adjustable, excellent 360° visibility, SENNEBOGEN Diagnostics System
|
| Service weight |
- Service weight with 42 m telescopic boom, 20 t hook and wheelded undercarriage MS 70, tyres 8x14.20-24,
approx. 65 t
|
* Further details see adobe specifications download or please contact PACECRANES.
† Due to improvements, the specifications are subject to
change without notice.
