Sennebogen Cranes

6130HD Duty Cycle Crane

Lifting Capacity : 120t
Boom height : 69.1m
Engine capacity : 354-470kW
Winch : 200-300kN

Engine

Caterpillar Diesel engine C15 Tier III, with direct injection, water-cooled. 354 kW (481 HP) at 1800 rpm.

Optional:
Caterpillar Diesel engine C18 Tier III, with direct injection, water-cooled. 470 kW (639 HP) at 1800 rpm.

Dry air filter with preliminary filter, main and safety element.
Electric system 24 Volt, high efficiency cold starting batteries. Idling speed function.
Fuel tank capacity: approx. 850 l

Hydraulic-system

All hydraulic pumps are variable displace- ment piston pumps with individual regu- lation for each pump. The pumps are equipped with an energy-saving flow-on-demand control system and pressure cut-off for high efficiency and reduced loss of energy.
Max. flow rates:
420 l/min for travel and winch 1
420 l/min for travel and winch 2
200 l/min for boom hoist
200 l/min for swing
Working pressure up to 330 bar. Hydraulic tank capacity approx. 1000/800 l
Optional:
Additional hydraulic packages for exter- nal user (e. g. casing machines, vibrators, hydro cutter etc.)
Hydraulic filters with long intervals between change.
Large dimensioned hydraulic cooling system. Servo-assisted joy-stick controls according to ISO-System. Central service tableau. Decomposable hydraulic oil (synthetic) can be used.
Hydro Clean hydraulic superfine filter with water absorption. (Optional)

Swing Drive

The swing function is operated through hydraulic piston motor with oil bath plane- tary gear. Spring-loaded hydraulically releasable multiple-disc brakes self- closing.
Large dimensioned triple roller slewing ring. Swing speed from 0 to 3.4 rpm, 0 to 1 rpm for crane operation. Power trans- mission through 2 swing motors, thus less tooth pressure and moments. Precision swing operation with preselector switch.

Upper Structure

Torsion-free precision machined upper frame. All components are located clearly and service friendly. Engine with low noise level.

Boom Hoist Operation

Completely independent operation by a separate hydraulic circuit over axial piston motor, spring-loaded hydraulically releasable multiple-disc brake, planetary gear and winch drum with special scores. Max. line pull 110 kN (11 t), rope dia 20 mm. Drum pawl lock provides an integral drum lock.

Winch 1 - Winch 2

Each winch is driven independently by a directly flanged variable displacement hydraulic piston motor with high pressure regulation. Hydraulic brake valves for wear resistant braking of loads. Strong low maintenance oil bath planetary gears. The clutch and brake functions are effec- ted through large dimensioned, mainten- ance-free, low-wearing, oil-lubricated safety-multiple disc brakes.

Grab closing automatics for 2 rope grab operation- dividing the load equally onto both winches.
Combilink – for dragline operation, allows power load lowering for the dredging winch.

Winches 20t 25t 30t
Single line pull kN (1. Layer) 200 250 300
Rope dia. mm 28 34 34
Line speed m/min 95 85 73

Working Equipment

Tubular boom 18.7 m – 69.1 m, double sheave hammer head, crane/grab/ dragline equipment.
Complete crane safety device with electronic SLI-Safe load Indicator.

Undercarriage

Strong wide gauge crawler undercarria- ge. Each track is independently driven by an axial piston motor through planetary final drive. Spring loaded hydraulically releasable multiple-disc brake. Maintenance-free tractor type crawler with hydraulic track-tensioning device. Tractor type crawler. Excellent rough terrain travel.

6130 HD travel speed with crawler B9HDS
is 0 – 1.3 km/h.

Operators Cab

Comfortable F 2000 operator’s cab, resili- ently mounted, with exceptional sound suppression, large-capacity compartment with excellent allround visibility, all-weat- her design with tinted safety glass, front windscreen with ventilation position stows under the roof, large-size skylight, window wiper/washer system for front windscreen and skylight, front guard panel, ventilation hatch in the roof, large- capacity stowage rack, ergonomically designed comfortable seat, resiliently mounted, adjustable in suspension and height, seat cushion adjust-able in depth and angle, adjustable lumbar support, wide adjustable armrests, clearly laid out instrument panel with ergonomically shaped control levers, infinitely variable cab heating system, outside air and circulating air stages, with particle filter. Five adjustable air vents for optimum work environment, new SDS diagnostic system for monitoring of all essential machine and engine functions, includes visual and audible warning of any malfunctions, wide range of additional features and equipment.

Service Weight

Basic Machine 6130 HD with 2 x 20 t Freefall winches, Engine 354 kW, basic boom 18.7 m, track B9HDS, length 7200 mm, 1000 mm double bar shoes
with wide gauge Star-Lifter undercarriage and counterweight 38 t

113 t

with hydraulically exendable undercarriage and counterweight 38 t and 20 t carbody- counterweight

130 t

* Further details see adobe specifications download or please contact PACECRANES.
† Due to improvements, the specifications are subject to change without notice.