Mobile Harbour Cranes

Sennebogen Cranes

680HMC Port Crane

Lifting Capacity : 45t
Boom height : 37.3m
Engine capacity : 261kW

Engine

  • Caterpillar Dieselengine C9 with direct injection
  • watercooled
  • 261 kW (355 HP) at 1800 rpm
  • Dry air filter with main and safety element
  • Electric system 24 Volt, high efficiency cold starting batteries
  • Idling speed function
  • Fuel tank capacity approx. 800 lCAT diesel engine C7 with direct injection

Hydraulic-system

All hydraulic pumps are variable displacement piston pumps with individual regulation
for each pump. The pumps are equipped with an energy-saving flow-on demand control system and pressure cut-off for high efficiency and reduced loss of energy.
Max. flow rates:

  • 300 l/min for travel and winch 1
  • 300 l/min for travel and winch 2
  • 200 l/min for boom hoist
  • 200 l/min for swing

Working pressure up to 330 bar.
Hydraulic tank capacity approx. 900/710 l Hydraulic oil filters with long intervals between change. Large dimensioned hydraulic cooling system. Servo-assisted joy-stick controls according to ISOSystem. Central service tableau. Decomposable hydraulic oil (synthetic)
can be used. Hydro Clean hydraulic superfine filter with water absorption (optional).

Winch 1 - Winch 2

Each winch is driven independently by a directly flanged variable displacement hydraulic piston motor with high pressure regulation. Hydraulic brake valves for wear resistant braking of loads. Strong low maintenance oil bath planetary gears. The clutch and brake functions are effected through large dimensioned, maintenance-free, low-wearing, oil-lubricated multiple disc brakes. Grab closing automatics for 2 rope grab operation – dividing the load equally between both winches. Combilink – for dragline operation, allows

Winches 16 t
Single line pull kN 1.Layer 160
Rope dia. mm 26
Line speed m/min 110
Optional: Additional crane winch

Swing drive

The swing function is completely independent operated by a separate hydraulic circuit through 2 swing drives each with hydraulic piston motor and oil bath planetary gear. Spring-loaded hydraulically releasable multiple-disc brake, self-closing. Swing speed from 0 to 4,0 rpm, 0 to 2 rpm for crane operation. Precision swing operation with preselector switch.
Large dimensioned swing bearing, external gears thus less tooth pressure and moments.
Optional: Heavy duty triple roller bearing.

Boom Hoist Operation

Completely independent operation by a separate hydraulic circuit via axial piston motor, spring-loaded hydraulically releasable multiple-disc brake, planetary gear and winch drum with special scores. Max. line pull 45 kN (4.5 t). Drum pawl lock provides an integral drum lock.

Upper Structure

Torsion-free precision machined upper frame. All components are located clearly and service friendly. Engine installation very service-friendly in longitudinal direction with low noise level.
Counterweight 17.2 t

Undercarriage

Undercarriage welded as rigid, torsion-free box-type design with integrated 4-point outriggers. The drive function is powered by 2 variable displacement piston motors with
directly flanged brake valves. 2-circuit servo brake system with additional safety brake as parking brake. Steering axle as hydraulically controllable oscillating axle. Oscillating axle cylinders with safety check valves.
Drive speed 0 – 10 km/h
70 t special wide gauge axles
8 tires, 14.00-24
Optional:
8 tires, 16.00-25

Working equipment

Tubular boom 20.5m/26.1m/31.7m/37.3m, double sheave hammer head, fixed jib, auxiliary jib. Complete crane safety device with electronic SLI-safe load indicator. Various range of additional equipment on request.

Operators cab

Comfortable F 2000 operator’s cab, resiliently mounted, with exceptional sound suppression, large-capacity compartment with excellent allround visibility, all-weather design with tinted safety glass, front wind-screen with ventilation position stows under the roof, large-size skylight, window wiper/ washer system for front windscreen and skylight, front guard panel, large-capacity stowage rack, ergonomically designed comfortable seat,
resiliently mounted, adjustable in suspension and height, seat cushion adjustable in depth and angle, adjustable lumbar support, wide adjustable armrests, clearly laid out instrument panel with ergonomically shaped control levers, adjustable steering column (mobile machines only), infinitely variable cab heating system, outside air and circulating air stages, with particle filter. Five adjustable air vents for optimum work environment, new SDS
diagnostic system for monitoring of all essential machine and engine functions, includes visual and audible warning of any malfunctions. Wide range of additional features and equipment.

Service weight

Base machine 680 HMC, 2 x 16 t free fall winches, 260 kW diesel engine, 20.5 m basic boom, counterweight 17.2 t 

approx. 66 t

Note: The shown weights may vary with different equipment

* Further details see adobe specifications download or please contact PACECRANES. † Due to improvements, the specifications are subject to change without notice.