Suction Disc UPG1000

Uplifter glass lifters

Glass Vacuum Suction Disc UPG1000

Lifting capacity max. 1000kg
Suction cups Ø 400mm

The UPG1000 Glass Vacuum Suction Cup lets you effortlessly lift and move loads of up to 1000kg. Thanks to the modular design, the suction cups can be optimally adjusted to the respective situation without tools. The extension arms allow even larger elements to be picked more easily. The built-in support arm can be removed if necessary.

Particular attention was paid to the development of suction cups. These have an extremely high adhesion and are characterized by their long durability. It is important when sucking in that the element to be lifted has a smooth, flat and impermeable surface.

The suction process takes place directly on the device. Optionally, the suction process can be controlled via a wireless remote control. Also, the user is warned acoustically in case of impending vacuum loss. The supply of electricity is independent of the mains via the integrated battery.

As a rule, the vacuum system has an operating time of approx. 8 hours. If required, the suction system can be rotated 360 degrees and tilted 90 degrees and can be used on almost any construction site.

Contact Pace Cranes to discuss the possibilities with this panel lifter on your work site.

Vacuum system


Lifting capacity

400 kg | 600 kg | 800 kg | 1000 kg

Vacuum plates

4 pcs. | 6pcs. | 8pcs. | 10pcs. | Ø 300 mm

Device weight

100 kg | 106 kg | 116 kg | 126 kg


Off-grid Motor with 12 volt rechargeable battery

Operating temp.

0 up to 40°C

Operating time

8 hours


Manually without raster


Manual turning 360° with raster 90°

Protective devices

Optic/acoustic warning devices (low Vacuum warning buzzer)


4 Extension arms


  • Mount-Extensions
  • wireless remote control

* Further details, please contact PACECRANES.
† Due to improvements, the specifications are subject to change without notice.