Telescoping Crawler Cranes

Sennebogen Cranes

683 Crawler Telescopic Crane

Lifting Capacity : 80t
Boom height : 42 + 16m
Engine capacity : 186kW
Weight: 82t

Engine

  • Deutz Diesel engine TDC2013L062V, with direct injection, water-cooled.
  • Output as per DIN/ISO: 186 kW (253 HP) at 2000 rpm.
  • Dry air filter with cyclone preliminary filter, safety element and pollution indicator.
  • Fuel tank capacity: 550 l.
  • Electric system 24 Volt 2 highly efficient cold starting batteries

Hydraulic-system

  • Load-sensing hydraulic-system.
  • The variable displacement piston pump is equipped with pressure cut-off function and with a energy-saving flow-ondemand control.
  • Through the independent and proportional feed of the oil flow all working functions can be operated parallelly, independently and very precisly.
  • High efficiency through well designed hydraulic valves and lines.
  • Seperate hydraulic circuit for the swing drive.
  • Individually and precisely swing operation.
  • Axial piston pumps Flow rates 1 x 520 l/min, 1 x 80 l/min working pressure 330 bar
  • Hydraulic tank capacity 1350/1150 l
  • Hydraulic oil filter with long time change interval.
  • Healthy oil temperature through high dimensioned hydraulic oil cooler.
  • Central service board for easy and rapid check of complete hydraulicsystem.
  • Servo joy sticks for operating movements and additional functions as per ISO-System

Swing drive

  • The swing operation is driven independently through an axial piston motor, spring-loaded hydraulically releasable multiple-disk brake, planetary gear and pinion shaft.
  • Large dimensioned swing bearing.
  • Swing speed 0 – 2.0 rpm, infinitely controllable.
  • Hydraulic motor with integrated brake valves for reduction of wear in braking system to a minimum

Undercarriage

  • Each track is independently driven by an axial piston motor through planetary final drive.
  • The drives are integrated into the track frames and protected by covers.
  • Spring loaded hydraulically releasable multiple-disk brakes as safety parking brakes for reliable stopping.
  • Version I: Undercarriage hydraulically extendable Tele 83/390.
  • Version II: Starlifter undercarriage R87/440 in wide gauge version, gauge width 4.4 m, 4 hydr. cylinders, removable side frames for transport.
  • Maintenance-free track-type B7 with triple-bar-grouser track pads and hydraulic track-tensioning device.
  • Travel speed 0-2.5 km/h, 2-speed travel motors.
  • High traction force and good ground clearance to ensure excellent rough terrain travel.
  • Option: 900 mm flat track shoes

Uppercarriage

  • Torsion-free upper frame with continous bearing-plates for optimal power introduction, precision machined.
  • Steel-bushes for the boom-pivot. Special sound insulation for the engine

Working Equipment

  • Telescopic five-section boom, hydr. extend- and retractable.
  • Boom hoist cylinder and telescopic cylinder with safety check valves.
  • Hoist winch via hydraulic motor with safety valve and planetary gear with safety multi-disk-brake in the oil bath.
  • Line pull max. 72 kN, hoist speed max. 0 – 95 m/min, rope dia. 20 mm.
  • Jib, adjustable (0º/20°/40º), it can be mounted very fast and very easily without any helping devices.
  • If fly jib is not used, it can be locked on the side of the main boom.
  • Safety equipment according to Australian regulations.
  • Safe load indicator (SLI) with clear text indication of boom angle, boom length and radius, hoist end switch

Operators cab

SENNEBOGEN maXcab with sliding door, excellent ergonomics, automatic heating/air conditioning with temperature pre-select and fresh air/recirculation filter, air suspended comfort seat optionally adjustable, excellent 360° visibility, SENNEBOGEN Diagnostics System

Operating weight

  • Service weight with 42 m telescopic boom, jib, 20 t hook and track-type B7 with 700 mm triple-bar track shoes, 1 hoist winch
  • 683 HD with hydraulically extendable undercarriage, counterweight 20,5 t, carbody counterweight 13 t approx.: 83.5 t
  • 683 HD Star-Lifter with wide gauge undercarriage, counterweight 25.9 t, carbody counterweight 8 t, 1 hoist winch approx.: 86.3 t

* Further details see adobe specifications download or please contact PACECRANES.

† Due to improvements, the specifications are subject to change without notice.